Sinotectronics Inc.
Sinotectronics, touch the world!
Add to Cart
Master Touch Minisize PCAP 1.5 Inch Cover Lens Film Film Sensor Touch Panel
1. Product Description
A touch screen is a display device that allows the user to interact with a computer using their finger or stylus. They're a useful alternative to a mouse or keyboard for navigating a GUI (graphical user interface). Touch screens are used on a variety of devices, such as cash registers, and information Kiosks. And this 1.5 inch minisize touch panel is commonly used to the watch.
2. Module Specification
2.1 Basic Information
| Item | Feature |
| Controller | FT6336G |
| Channel | TX :- RX: - |
| Power | 3.3V |
| Communication | IIC |
| Number of Touch point | 10 |
| O.S. | Windows/ Android/ Linux |
| Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V |
| Item | Specification | Unit |
| Screen Size | 1.5 | Inch |
| Viewing Area | 28.12(L)×28.12(W) | mm |
| Cover lens O.D | 51.2(L)×51.2(W) | mm |
| Item | Specification | |
| Transparency | Viewing Area | ≧85% |
3. Sensor Specification
| Item | Specification | Unit | ||
| Stacked structure | Cover | 0.7 | mm | |
| Top OCA | 0.25 | mm | ||
| Sensor Dimension | OD Size | X | 50.95 | mm |
| Y | 50.7 | mm | ||
4. Electrical Specification
| Item | Type | Value | Unit | Remarks |
| Operating Temperature | - | -20 ~ +80 | ℃ | Humidity 20%~85% RH |
| Storage Temperature | - | -30 ~ +80 | ℃ | Humidity 20%~85% RH |
| ESD Requirement | ESD air requirement | ±8 | KV | Air |
| ESD contact requirement | ±6 | KV | Touch |
5. Test
| Item | Specification | Result | |
| Cover lens | Ball Drop | 200g ± 2g 35cm | One drop test on each of the 5 selected points, No damage |
| Hardness | Pencil: 6H Pressure: 1N/45° | Hardness ≧ 6H | |
| Warpage | By Gauge | Warpage 0.1% ≦ Length * | |
| FPC/COF | Bending | Bending range0-180° 30times Electrical Function ok | - |
6. Drawing
7. Details
8. Cosmetic Inspection
The following standard only applies to the visual areas. If the TP function is good, the non-visual appearance may negotiate to relax the standard. W=Width L=length D=Diameter GT=Glass thickness. If soft cloth which dips in alcohol can wipe besmirch, it does not apply to this appearance standards.
Inspection methods and conditions:
1)Inspection environment: Temperature:20-22 ℃; Humidity: 65 + 10% RH;
2)Inspector qualifications: The appearance of product must be inspect by a good eyesight inspector.
3) Inspection methods: The distance between inspector and product should be 30±2cm and putting a lamp 12 to 20 watts of cold white fluorescent lamp in the observation station of product.
9. FAQ