Sinotectronics Inc.
Sinotectronics, touch the world!
Add to Cart
Master Touch 12 Inch Plug-and-play Touch Foil Screen Work with Projector
1. Product Description
Master Touch touch film is stable and interactive, supporting single, dual, multi touch and supporting palm rejection. MST STM Series is small size touch foil, ranging in 7 inch to 32 inch. Our foils can pass through maximum 10mm cover glass, low surface resistance means good electrical conductivity, and customer can eliminate noise by grounding.
2. Technical Datasheet
| Part No.: | MST-MCW-TFS-12-STM |
| BOM Code: | 1.11.120.01.0000 |
| Project Code: | M120S |
| Structure: | Film+Micro Copper Wire+Film |
| Copper Wire Diameter: | 15 microns |
| Base Material: | PET Film |
| Controller IC: | STM Series |
| Driver Type: | Driver-free, plug-n-play |
| Communication Interface: | USB2.0/3.0 |
| Working Voltage: | 5V |
| Standard USB Cable Length: | 1,500mm |
| Thru-Glass Capability: | Max. 6mm |
| Screen Ratio: | 4:3 |
| Foil Size: | 267.44*203.93mm |
| Active Area: | 243.84*182.88mm |
| Controller Size: | 87.0*47.0mm |
| FPC direction: | Short side |
| Light Transmittance | ≧89% |
| Lamination Method: | Wet Lamination (OCA) |
| Lamination Substrate: | Glass/Acrylic/PMMA or other non-metallic material |
| Inductive method | Improved projected capacitive technology |
| Touch accuracy | ±1mm |
| Touch Points | 1~12 points (adjustable) |
| Calibration method | Automatic |
| Response time | <10ms |
| Frame scan frequency | 120FPS |
| Lifetime | 9 Years |
| Temperature Range | -15℃ to + 75℃ |
| Working Environment | 0~ 95%RH(Unaffected by condensation) |
| OS compatibility | Windows XP ,Windows 7,Windows 8, Windows10 (32/64) |
| MAC OS X Lion | |
| Linux (Kernel version above 3.8) | |
| Above Android 4.0 (Kernel version above 3.1) | |
| EMC | EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011 |
| Power Consumption | <0.5W |
| *This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:(1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. | |
3. Drawing
4. Details
5. Applications
6. FAQ